Резиновый подъемный ремень
Базовая информация
Модель: Rubber Lifting Belt
Описание продукта
Rubber lifting belt is multi-layer silica gel fabric folded with cover rubber outside the belt core. It can be classified in heat-resistant lifting belt and common lifting belt as per application temperature while can be classified in full-cotton, Dacron and cotton, nylon and EP lifting belt as per core material. 1.Physical properties and level of cover rubber. It can be divided as type D for heavy-wear, type L for middle-wear and type T for high-temperature material conveyance as per wear and load of material. 2.Wide specification of lifting belt: 150 200 250 300 350 400 500 600mm etc. 3.Technical requirement of lifting belt. |
1. Physical property of cover rubber is as below: |
Item |
Index |
||
|
Type D |
Type L |
|
Tensile strength Mpa≥ |
18.0 |
15.0 |
|
Tensile yield %≥ |
400 |
350 |
|
Hot-air aging |
Tensile strength variation% |
-25-25 |
|
70ºCx7d |
Tensile yield variation% |
||
Abrasion value cm3 |
0.7 |
0.8 |
Remarks:Physical property of cover rubber will depend on if lift special material or acute wear material. 1.Cover rubber property of heat-resistant belt (T type) should accord with HG/T2297 (heat-resistant belt) standard. 2.Longitudinal tensile strength of belt should not lower than nominal value below: 100/ 125 /160/ 200 /250/ 315/ 400 /500N/mm . 3.Tensile yield of belt longitudinal thickness should not lower than 10% and reference elongation should not more than 4%. 4.Bond strength between layers of lifting belt with fabric core is listed as below: N/mm. |
Fabric class and item |
Between layers |
Between cover and cloth layer |
||
Thickness of cover |
Thickness of cover |
|||
100% Nylon fabric |
Average of longitudinal test≥ |
5.25 |
3.15 |
4.50 |
Minimum of longitudinal test≥ |
3.85 |
2.40 |
2.85 |
|
100% other synthetic fabrics |
Average of longitudinal test≥ |
4.50 |
3.15 |
3.50 |
Minimum of longitudinal test≥ |
3.85 |
2.40 |
2.85 |
|
Cotton canvas |
Average of longitudinal test≥ |
3.00 |
2.20 |
2.60 |
Minimum of longitudinal test≥ |
1.95 |
1.60 |
1.95 |
|
Other natural fabric |
Average of longitudinal test≥ |
3.15 |
2.35 |
2.80 |
Minimum of longitudinal test≥ |
2.70 |
1.60 |
2.20 |
Примечание: Прочность связи между слоями жаростойкой конвейерной ленты с тканевым сердечником должна соответствовать стандарту HG / T2297.
Группа Продуктов : Антипригарные Конвейерные Ленты
Premium Related Products